MIM金屬粉末密煉機介紹
1. 密煉室為“W"形,采用“M”形下加壓蓋,形成全封閉混煉空間。攪葉采用棱形螺旋無死角設計,使物料剪切分散達到物性要求。 The W-shapedmixing chamber and M-shaped pressing ram to form a fully enclosed mixing space.The stirring blade is designed as a prismatic helix with no dead angles toshear and disperse the material to get a better mixing result.
2. 與物料接觸部分(密煉室/側板/壓錘/攪葉軸)采用優質高碳鋼,經調質、高精度機加工,真空72小時深度氮化熱處理后表面噴涂碳化鎢,后做光潔度處理 耐磨,防腐蝕,不易粘料,使用壽命長。 Theparts contacting with materials (mixing chamber/side plate/hammer/stirringblade shaft) are made of high-quality high carbon steel, which are quenched& tempered and machined with high precision. After 72 hours of vacuumnitriding treatment, the surface is sprayed with tungsten carbide. They arewear-resistant, corrosion-resistant, non-sticky and has a longer service life.
3. 昶豐防漏粉裝置采用機械軸封迫緊技術,并且采用帶自潤滑密封圈密封,使物料在混煉過程中密封圈始終處于壓迫密封狀態。 Leak-proof device adopts mechanical shaft sealing technology andself-lubricating sealing ring to seal. The sealing ring is always in acompressive sealing state during mixing.
4. 本機采用貫穿式加熱系統,加熱更迅速,傳溫更均勻,比傳統加熱板加熱效率提高百分之五十。并可根據客戶需求,采用PLC程控系統。This machineadopts through type heating system which can heat more quickly and distributetemperature more evenly, and it can increase heating efficiency by 50% comparedwith traditional heating plate. The PLC program control system can becustomized according to customer needs.
鄭重聲明:以上信息由企業自行發布,該企業負責信息內容的完整性、真實性、準確性和合法性。本網站對此不承擔任何責任。